A long deep drag of your favorite flavor can release a whole day of office stress. But, sometimes, you won’t get a satisfying cloud of vapors.
Instead, you’ll get a harsh throat hit that burns or the metallic flavor. This is especially common if you don’t maintain your vape coils.
It’s called dry hits; you usually experience it when your wick isn’t completely saturated. But, there are a few other reasons why you might get them.
Let’s look at the most common causes and how to stop vape coils from burning.
10 Ways To Stop Vape Coils From Burning
If your vape coil was burning too fast and fed up with dry hits, then read the various tips below.
1. Prime Your Vape Coil
If you’re using a new coil, you must prime it after replacement. When you don’t prime your coil, there is the risk of dry hits and a burnt coil.
To do this, simply add a few drops of e-juice to the cotton wicks and let it sit for a few minutes.
Once it’s had time to soak up the juice, you can reassemble your vape and enjoy your new flavor.
2. Lower The Power Wattage
There is no set rule for wattage setting, and you must test and experiment with your vape juice.
Sometimes higher power output creates too much heat, leading to a dry hit. If you’re experiencing this, try turning down the wattage on your device.
This will generate lower heat and allow your vape juice to flow more freely. As a result, you’ll enjoy bigger clouds and bolder flavors.
3. Clean Your Vape Coil Regularly
If you don’t clean your vape coil, it accumulates the gunk build-up. Eventually, this impacts the coil’s performance, and you’ll start to get dry hits.
To clean your coil, simply unscrew it from the device and soak it in warm water for a few minutes.
If the gunk is stubborn, you can use a cotton swab and vodka to remove it. Just be sure to rinse the coil thoroughly. As a result, you’ll get less flavor and more frequent dry hits.
4. Use Higher PG Vape Juice
The prime ingredients of vape juice are Vegetable Glycerin (VG) and Propylene Glycol (PG). The VG/PG ratio is an important factor to consider when buying vape juice.
Propylene Glycol (PG) is comparatively thinner than Vegetable Glycerin (VG). As a result, it seeps into the wick faster and prevents dry hits.
So, if you’re using a coil with a low resistance level, it’s best to opt for a vape juice with higher PG levels. This will ensure that your wick stays saturated and you don’t get any dry hits.
5. Keep Your e-Liquid Levels Topped Up
If your vape tank runs out of e-liquid, it will dry out the wick, and you’ll get a dry hit, and your vape coil will burn faster.
To avoid this, always keep your vape tank filled with e-liquid. But don’t overfill otherwise; you’ll face gurgling issues. This way, you can be vaping for long hours without any dry hits.
6. Reduce Chain Vaping
Chain vaping is when you take multiple puffs in succession without taking a break. This quickly dries out the wick, leading to a dry hit, and you’ll get a burning sensation.
To avoid this, take breaks in between puffs. This gives the wick time to re-saturate and prevents dry hits.
7. Take Breaks Between Vaping Sessions
You should take breaks between vaping sessions if you’re a heavy vaper. This allows your vape coil to cool down and prevents dry hits.
8. Rotate Your Flavors Regularly
If you’ve been vaping the same flavor for a while, it’s time to switch things up. This is because certain flavors are harsher on coils than others.
As a result, they break down the coil faster, and you’ll start to get dry hits. So, it’s best to rotate your flavors regularly to prolong the life of your coil.
9. Use High-quality e-Liquids
The quality of your vape juice has a direct impact on the life of your coil. If you’re using low-quality vape juice, it will gunk up the coil faster, and you’ll get dry hits.
To avoid this, always use high-quality e-liquids from reputable brands. This might cost a little more, but it’s worth it for your vape’s improved performance and flavor.
10. Use Temperature Control
All vape mods come with a temperature control feature. This allows you to set a maximum temperature limit for your coil.
As a result, your coil won’t get too hot and prevents dry hits. So, if you’re using a high wattage device, it’s best to use the temperature control feature.
Why do my vape coils keep burning?
There could be many reasons why your vape coil burning. Maybe you’re using the wrong type of juice, chain vaping, or not cleaning your coils regularly.
How do I make my vape stop burning taste?
If your vape is burning, it’s because the coil is not properly saturated. To fix this, you can try a few things like using a higher VG juice, cleaning your coils regularly, or taking breaks between puffs.
How long do vape coils last?
On average, a vape coil lasts between 2-3 weeks. But, this depends on many factors like the type of juice you’re using, how often you’re vaping, and how well you maintain your coils.
How can I make my vape coil last longer?
You can do a few things to prolong your vape coil’s life. These include using a higher VG juice, cleaning your coils regularly, and taking breaks between vaping sessions.
Is it possible to fix a burnt coil?
If your coil is burnt, it’s because it’s dried out. To fix this, you can try wicking the coil or replacing it with a new one. If the problem persists, it might be time to upgrade to a new vape.
Conclusion
Vape coils burning is a common problem that vapers face. But, by following the tips mentioned above, you can avoid this issue and enjoy your vaping experience to the fullest. So, what are you waiting for? Go ahead and try out these tips the next time you vape!’
